+13
ad24gti
dsmithmobile
mrgarf
boothy
han
spen
Nick_mk2
moggy
Geeman
Jezz
mackavelli
sarah
sam_16v
17 posters
project sweet f**k all - some new pictures 10/02
sam_16v- bingo ball
- Number of posts : 1554
Age : 36
Location : hull
aka : downsy
Registration date : 2007-03-19
masses of body work coilovers - im stepping up in the world
Guest- Guest
its going to be a peach when its finished spam.
has he told you when its going to be done? also gayem has some 14" steels that need tyres, he would probably give you them
has he told you when its going to be done? also gayem has some 14" steels that need tyres, he would probably give you them
Guest- Guest
yer man need rid of these steelies! you can have them just gimme a shout...
lookin forward to this bein done mate!
lookin forward to this bein done mate!
sam_16v- bingo ball
- Number of posts : 1554
Age : 36
Location : hull
aka : downsy
Registration date : 2007-03-19
ive allready got a set of steelies thanks greame - and not sure if 13s would fit on and four inch tyres on a valver would be interesting!
Gonna fit the coilies tomorow, not sure if itl go much lower though, well see.
Gonna fit the coilies tomorow, not sure if itl go much lower though, well see.
Guest- Guest
ill have em if ther goin spare n sam doesnt want em
Guest- Guest
sorry boys there bein used now! adrian said he wants them
Guest- Guest
I could take you danny, and considering they were mine i think i get first dibs on them
sarah- mrs hardwork
- Number of posts : 4089
Age : 49
Location : the homeland of vuu
aka : mrs hardwork
Registration date : 2007-02-15
sam wrote:masses of body work coilovers - im stepping up in the world
its gonna be ace sam
sam_16v- bingo ball
- Number of posts : 1554
Age : 36
Location : hull
aka : downsy
Registration date : 2007-03-19
thanks sarah coilies to day
Jezz- Admin
- Number of posts : 6293
Age : 48
Location : vuu.cult homeland
aka : Rev. work
Registration date : 2007-02-14
im looking forward to the great un-vail got to save it till u have some wheels on it mate
sam_16v- bingo ball
- Number of posts : 1554
Age : 36
Location : hull
aka : downsy
Registration date : 2007-03-19
im thinking that too jez
got front coilies on today, i couldnt get the back one on cos itd mean tearing ou all the masked up windows.
It dosent look that low but it can go lower theres 70mm left on the coilies (150 max drop)
said pics
got front coilies on today, i couldnt get the back one on cos itd mean tearing ou all the masked up windows.
It dosent look that low but it can go lower theres 70mm left on the coilies (150 max drop)
said pics
Jezz- Admin
- Number of posts : 6293
Age : 48
Location : vuu.cult homeland
aka : Rev. work
Registration date : 2007-02-14
looking good sam kinda love it in undercoat
looks low to me as is
at the end of the day you gotta drive it
looks low to me as is
at the end of the day you gotta drive it
dsmithmobile- site modder
- Number of posts : 2260
Age : 45
Location : West Hull
aka : Dan
Registration date : 2007-02-21
Are you rolling the arches before painting? if not you may want to think about doing it cos if you find you have to do it later you will risk cracking your fresh new paint
sam_16v- bingo ball
- Number of posts : 1554
Age : 36
Location : hull
aka : downsy
Registration date : 2007-03-19
hmm maybe if i want to get my bodyshop guy to hit me dan!
There new wings, that where a pig to fit and new rear arches had to be welded in and they're all ready for paint now.
At the minute the tyres on those wheels are 195/55 on a 6 inch rim and im gonna run 195 45 on a 7 inch rim, so hopfully a much lower profile - what do you people think? im sceptical about the new wheels fiting imo
There new wings, that where a pig to fit and new rear arches had to be welded in and they're all ready for paint now.
At the minute the tyres on those wheels are 195/55 on a 6 inch rim and im gonna run 195 45 on a 7 inch rim, so hopfully a much lower profile - what do you people think? im sceptical about the new wheels fiting imo
sam_16v- bingo ball
- Number of posts : 1554
Age : 36
Location : hull
aka : downsy
Registration date : 2007-03-19
nothing much to up date
where the panels meet on the valance and the panel beneath the boot have been welded and filled - i dont know why i dint do them in the 1st place.
Got a new distributor, might have some black (VR6) corrado seats on the way. And im watching a knackerd mk3 vr6 on the bay.
Ive bought a lot of polishing gear to polish the new wheels - and abrasive one and two sets of very small mops im gonna polish the whole lot, spokes and wheels.
Still havnt put the coil overs on the back.
Im keeping the side exit just gonna raise it up a bit, was think audi a5 style tail pipe
where the panels meet on the valance and the panel beneath the boot have been welded and filled - i dont know why i dint do them in the 1st place.
Got a new distributor, might have some black (VR6) corrado seats on the way. And im watching a knackerd mk3 vr6 on the bay.
Ive bought a lot of polishing gear to polish the new wheels - and abrasive one and two sets of very small mops im gonna polish the whole lot, spokes and wheels.
Still havnt put the coil overs on the back.
Im keeping the side exit just gonna raise it up a bit, was think audi a5 style tail pipe
Jezz- Admin
- Number of posts : 6293
Age : 48
Location : vuu.cult homeland
aka : Rev. work
Registration date : 2007-02-14
photo of a5 tail pipe sam
sam_16v- bingo ball
- Number of posts : 1554
Age : 36
Location : hull
aka : downsy
Registration date : 2007-03-19
cant find one on e the net ill take a picture when im out and about
sam_16v- bingo ball
- Number of posts : 1554
Age : 36
Location : hull
aka : downsy
Registration date : 2007-03-19
not really much happening, ive got wheels body work taking much time.
I think ive scored a full vr6 rado interior (black) for 60 quid, and i just missed out on a full mk3 vr6 by 20 quid and it had a plate on (P9 VRG) must of been worth some thing.
Any way seen as there is no progress i thought id send pictures of the imminent polishing. I wonder what car these wheels are off? (if any one gives it away ill kill em!)
I think ive scored a full vr6 rado interior (black) for 60 quid, and i just missed out on a full mk3 vr6 by 20 quid and it had a plate on (P9 VRG) must of been worth some thing.
Any way seen as there is no progress i thought id send pictures of the imminent polishing. I wonder what car these wheels are off? (if any one gives it away ill kill em!)
Guest- Guest
If You require any help with the polishing giz a bell kid, think got a couple of sets of wheels lined up tho. Good Progress tho Sam
Jezz- Admin
- Number of posts : 6293
Age : 48
Location : vuu.cult homeland
aka : Rev. work
Registration date : 2007-02-14
good kit sam
jon whos mad enuff to let u loose on their wheels hope your paying them lol
jon whos mad enuff to let u loose on their wheels hope your paying them lol
Guest- Guest
You Know im good, dont hate the player, hate the game
Guest- Guest
it'll be done by weekend sam...
sam_16v- bingo ball
- Number of posts : 1554
Age : 36
Location : hull
aka : downsy
Registration date : 2007-03-19
aparantly it will hes got the bits to finsih the nooth, so next weekend maybe.
Thanks jon but i dont pay people to do stuff that i can do.
Thanks jon but i dont pay people to do stuff that i can do.
|
|